Publicité
Les langues disponibles
Les langues disponibles
Notice: The centre pin item B is not designed to hold the saw blade. This function is
performed by the clamping action of the socket head screw item A. Replace the screw, if it
cannot be securely tightened any more.
Do not lubricate the blade clamp.
Important – Before cutting an assembly, make sure that no electric lines of this
assembly are damaged or cut. If they are energized, there is danger to life due
to electrocution.
Cutting
•
Follow all safety precautions.
•
Install the correct saw blade, see "Mounting the saw blade".
•
Connect the machine to the air supply (blow out the hose before connecting).
•
Actuate the air supply.
•
Actuate the valve (ref. to fig. 5).
•
Start cutting.
•
Cool sufficiently the saw blade. Useful tips: refer to fig.6.
Start and stop
Press or release
Fig. 5
Plunge cutting
The sabre saw can also be used for plunge cutting:
•
Wood, plywood, wall boards and plastic material.
•
Mark clearly line of cut on the work piece.
•
Place the tip of the saw blade on the cutting point, while resting the saw on the lower edge of
the support shoe.
•
Start the saw and plunge the saw blade in the material while cutting carefully (see fig. 7).
•
Press the support shoe against the material to be cut.
Notice: Do not use plunge cutting for metal sheet.
38
Steel wire
Use of sticky tape
with
without
prevents from
splicing
Fig. 6
Profile
Use of wedge
prevents from
pinching
Plunge cutting
Fig. 7
Publicité
