S-VR
| Multifunctional wheelchair
5. Summary
(see Fig. 4)
Push handle
A
Back cushion
B
Front wheel
C
Sideguard
D
Seat pad
E
Drive wheel
F
Quick-release axle
G
Parking brake
H
Handrims
I
Legrests
J
Backrest extension (S-VR)
H H K
Backrest adjustment (infinite)
A A L
Armrest pad
J J M
Calf pad
J J N
Footplate (flip-up)
J J O
J J O
48
H H K
A A L
A A A
A A B
J J M
H H D
J J I
F F E
J J J
H H H
G G G
J J N
F F F
L L C
6. Assembly/Adjustments
Your new Bischoff & Bischoff wheelchair will be delivered in a Bischoff
& Bischoff original cardboard box, assembled and folded.
In order to avoid transport damage, detachable attachments are
delivered separately with the product.
Please see Chapter 5 for information on which accessories are available
for your wheelchair.
6.1. Folding and unfolding
Unfolding
•
Position the folding wheelchair next to you.
•
Tip the wheelchair towards you until the weight is off one of the
drive wheels.
•
Push the seat tubes apart and push them down with the flat of
your hand, until they lock into place in the bracket on the frame
(Fig. 5).
•
The seat pad must be completely unfolded.
•
Apply the left and right parking brakes on the drive wheels.
•
Fit the legrests and flip them inwards (see Chapter 6.2). Flip the
footrests down (Fig. 5)
•
Swivel the cross tube upwards and fix it on both sides using the star
screws (Fig. 6 A/B).
•
Fit the backrest and fix it on both sides using the star screws (Fig.
6 C)
•
Now you can sit down
Folding
•
First remove the backrest extension by undoing the star screws on
both sides and pulling the backrest extension upwards (Fig. 7 A).
•
Undo the star screws of the cross tube on both sides and swivel it
3.1
downwards (Fig. 7 B/C).
•
Flip the footplates and calf pads upwards (Fig. 8).
•
Remove the seat cushion, take hold of the front and rear of the seat
pad and pull it up,
4
Bischoff & Bischoff GmbH |2022-06-30 - Revision: 1
Multifunctional wheelchair |
6
5
7
8
S-VR
49