Télécharger Imprimer la page

Bosch GBH18V-36C Consignes D'utilisation page 17

Publicité

Les langues disponibles

Les langues disponibles

160992A536_GBH18V-36C 2/19/20 1:51 PM Page 17
For selection of dust collection systems
and operating instructions, see the
Operating / Safety Instructions for 'Dust
Extraction Attachments for Hammers
Service
Preventive maintenance performed by
un au thorized personnel may result in
misplacing of internal wires and
components which could cause serious
hazard. We recom mend that all tool
service be performed by a Bosch
Factory Service Center or Authorized
Bosch Service Station. SERVICE MEN:
Disconnect battery pack from the tool
before servicing.
Batteries
Be alert for battery packs that are
nearing their end of life. If you notice
decreased
significantly shorter running time
between charges then it is time to
replace the battery pack. Failure to do
so can cause the tool to operate
improperly or damage the charger.
Tool Lubrication
Your Bosch tool has been properly
lubricated and is ready for use.
specified in this manual may create a hazard.
Store accessories in a dry and temperate environment to avoid corrosion and
deterioration.
- 360˚ Auxiliary Handle
Dust Extraction
Maintenance
To avoid accidents, always disconnect the battery pack from tool
before servicing or cleaning.
NO USER SERVICE -
ABLE PARTS INSIDE.
tool
performance
Attachments and Accessories
Only use attachments or accessories specified in this instruction
The use of any other attachments or acces so ries not
manual.
Included
and Hammer Drills' included with your
tool or with the dust extraction
attachment.
Motors
The motor in your tool has been
engineered
dependable service. To maintain peak
efficiency of the motor, we recommend
it be examined every six months by a
Bosch Factory Service Center or
Authorized Bosch Service Station.
Cleaning
damage plastic parts. Some of these
are: gasoline, car bon tetrachloride,
chlorinated cleaning solvents, ammonia
and household detergents that contain
ammonia.
or
Ventilation openings and switch levers
must be kept clean and free of foreign
matter. Do not attempt to clean by
inserting pointed objects through
opening.
Sold Separately
- Connectivity module
-17-
for
many
hours
Certain
cleaning
agents and solvents
of

Publicité

loading