Warnings And Cautions; Led Safety Notices; Emc (Electromagnetic Compliance) And Safety - Avid Artist DNxIQ Guide De L'utilisateur

A Regulatory and Safety Notices

Warnings and Cautions

c
Never install equipment if it appears damaged.
c
Disconnect the power cord before servicing unit.
c
Only perform the services explicitly described in this document. For services or procedures not
outlined in this document, speak with authorized Avid service personnel.
c
Follow all warnings and cautions in the procedures.
c
Operate the device within its marked electrical ratings and product usage instructions.
c
If you need to replace a battery in an Avid hardware unit, be sure to use the correct battery
type. There might be a risk of explosion if a battery is replaced by an incorrect type. Dispose of
used batteries according to the manufacturer's instructions.

LED Safety Notices

Avid hardware might contain LED or Laser devices for communication use. These devices are
compliant with the requirements for Class 1 LED and Laser Products and are safe in the intended use.
In normal operation the output of these laser devices does not exceed the exposure limit of the eye
and cannot cause harm. Standard to which conformity is declared: (IEC/EN 60825-1 & IEC/EN
60825-2)
Recommended Optical laser modules: TSS-4F20-31DCR (PL-4F20-311C) & TSS-8F10-31DCR
(PL-8F10-311C) - Laser Class I

EMC (Electromagnetic Compliance) and Safety

Avid declares that this product complies with the following standards regulating emissions, immunity
and product safety:
• FCC Part 15 Class A
• ICES-003 Class A
• EN55022 Class A
• EN55024
• AS/NZS CISPR 22 Class A
• CISPR 22 Class A
• IEC/EN/UL 60950-1
• CAN/CSA-C22.2 No. 60950-1-07
11
Warnings and Cautions