Kratki LUCY 12 SLIM Mode D'emploi page 55

Cleaning of the combustion chamber (once a month)
1
To access the scraper is necessary to slide the door on
the top of the stove. (foto 1)
Extract the scraper by lifting the black knob. Activate 5/6
times the scraper by raising and lowering the knob to
make sure on the cleanliness of the heat exchange pipes.
3
Open the door and extract the ash tray. Remove with an
aspirator all the ash deposited within it. This operation can
be carried out more or less frequently depending on the
amount of pellets used. (foto 3)
Remove the brazier and to clean it from any residue. (foto 4)
5
Remove the combustion chamber fl oor with the aid of a
screwdriver and with a vacuum cleaner, clean under the
plate. (foto 5)
Remove the upper fl ame beater by pulling it with an open
hand towards you and aspirate the upper and bottom of
the fl ame-shell. (foto 6)
Cleaning of the "T" fi tting (every 60/90 days)
2
Raise the cover to the left of the combustion chamber.
(foto 1) Unscrew the two retaining screws of the stove
front. (foto 2)
4
Raise the stove front to release the "T" fi tting containing
compartment. (foto 3)
Turn the ash collection glass. foto 4)
Cleaning the surfaces
To clean the surfaces, use a rag dampened with water or
6
with water and a neutral detergent.
The use of aggressive detergents or
thinners can damage the surfaces of the
stove. Before using any detergent it is
advisable to try it on a small section out of sight
or contact the Authorized Assistance Centre for
information regarding the product.
1
3
Clean up the glass from
the residues accumulated
during the stove operation
(foto 5)
5
2
4
55