Sharp LL-T1820-H Mode D'emploi page 27

The DVI-I input connector pin
No. Function
1 TMDS data 2-
2 TMDS data 2+
3 TMDS data 2/4 shield
4 N.C.
5 N.C.
6 DDC clock
7 DDC data
Analogue vertically synchronised
8
signal
9 TMDS data 1-
10 TMDS data 1+
11 TMDS data 1/3 shield
12 N.C.
13 N.C.
14 +5V
15 GND
Power management
The monitor is based on the VESA DPMS*
2
DVI DMPM* standards.
To activate the monitor's Power Management func-
tion, both the video card and the computer must
conform to the VESA DPMS standard and the DVI
DMPM standard.
* 1 DPMS: Display Power Management Signalling
DPMS mode Screen Power
consumption
ON Display on
STANDBY
SUSPEND Display off
OFF
* 2 DMPM: Digital Monitor Power Management
DMPM mode Screen
consumption
ON Display on
OFF Display off
All manuals and user guides at all-guides.com
Specifications
No. Function
16 Hot plug detection
17 TMDS data 0-
18 TMDS data 0+
19 TMDS data 0/5 shield
20 N.C.
21 N.C.
22 TMDS clock shield
23 TMDS clock +
24 TMDS clock -
C1 Analogue red image signal
C2 Analogue green image signal
C3 Analogue blue image signal
Analogue horizontally synchro-
C4
nised signal
C5 Analogue GND
1 and the
H-sync V-sync
*
51W Yes Yes
No Yes
5W Yes No
No No
*Not using USB hub
Power
*
51W
5W
*Not using USB hub
27
DDC (Plug & Play)
This monitor supports the VESA DDC (Display Data
Channel) standard.
DDC is a signal standard for carrying out Plug & Play
functions on the monitor or PC. It transfers informa-
tion such as degree of resolution between the moni-
tor and PC. You can use this function if your PC is
DDC compliant and if it is set so that it can detect
the Plug & Play monitor.
There are many varieties of DDC due to the differ-
ences between systems. This monitor works with
DDC2B.