Attaching The Toroidal Ferrite Core To The Power Cord Of The Subwoofer - Samsung HW-H450 Manuel D'utilisation

CONNECTIONS
ATTACHING THE TOROIDAL FERRITE CORE TO THE POWER
CORD OF THE SUBWOOFER
You can reduce noise caused by electromagnetic radiation by fitting the ferrite core to the power cord of your
subwoofer.
1. Unlock and open the ferrite core.
2. Wind the power cable of your subwoofer around the
ferrite core twice. (Start winding 5 to 10 cm away
from the core).
3. Close the ferrite core by pressing it until it clicks.
14