Samsung HW-H450 Manuel D'utilisation page 10

REMOTE CONTROL
Press the ► button to pause playing the file temporarily.
Press the ► button again to play the selected file.
If there is more than one file on the device you are playing, and you press
You can select from 5 different sound modes - MUSIC, VOICE, SPORTS,
CINEMA, and STANDARD - depending on the type of sources you want
Press the SOUND EFFECT button on the remote control.
Select the STANDARD mode if you want to enjoy the original sound.
Press the SOUND EFFECT button for more than 5 seconds to turn on or
This will regulate and stabilize the volume level against a drastic volume
change caused by a channel change or scene transition.
Press the Bluetooth POWER button on the remote to turn the Bluetooth
Press the 3D SOUND button on the remote to add depth and
Each time the button is pressed, the selection changes as follows :
3D SOUND PLUS OFF  3D SOUND PLUS MUSIC 
+ Installing the Batteries in the Remote Control
1. Use a suitable coin to turn
the remote control's battery
cover counterclockwise to
remove it as shown in the
figure above.
Turns the Soundbar on and off.
Adjusts the volume level of the unit.
the # button, the previous file is selected.
Bluetooth POWER
POWER on function on and off.
See pages 19 and 20 for details.
3D SOUND (3D Sound Plus)
spaciousness to the sound.
Press the 3D SOUND on the remote control.
3D SOUND PLUS MOVIE
2. Insert a 3V lithium battery. Keep the
positive (+) pole facing up when
inserting the battery. Put the battery
cover on and align the '' marks side
by side as shown in the figure above.
POWER
VOLUME
Play/Pause
Skip Back
SOUND EFFECT
to enjoy.
off Smart Volume.
* Smart Volume
3. Use a suitable coin to turn the
10
remote control battery cover
clockwise as far as it will go to
fix it in place.