GreenWorks 25022 Guide D'utilisation page 7

SAFETY INFORMATION
authorized service center to avoid risk.
Save these instructions. Refer to them frequently and use them to instruct others who may
use this product. If you loan someone this tool, loan them these instructions also.
W A R N I N G ( P R O P O S I T I O N
Some dust created by power sanding, sawing, grinding, drilling and other construction activities
contains chemicals known to the state of California to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemical: work in a well ventilated area, and work with approved safety
The protector (it's a device that is calibrated to open the motor circuit upon reaching a certain
temperature/current but requires both cool down below the calibration point and removal of
power for resetting of the protector) in the mower helps to stop the mower if blade is stuck or
overload occurs.
When the protection happens, the operator should release the bail switch and pull the plug
immediately, then restart the mower after at least 5 minutes.
SAVE THESE INSTRUCTIONS
6 5 )
6