GreenWorks 25022 Guide D'utilisation page 14

ASSEMBLY INSTRUCTIONS
ASSEMBLING THE HANDLE (See Figure 3.-4.)
Remove any packing material which may be between the upper and lower handles for
shipping purposes.
Pull up and back on the upper handle to raise the handle into the operating position. Make
certain the lower handle is seated securely into the handle mounting bracket (see Fig. 3).
Align the holes (3) between the upper handle (1) and lower (2) handles. Insert the cam locks (4)
and tighten them with the wing nuts (5) provided.
Secure the lower handle to the bracket with the knob (6) in each side (see Fig. 4).
Fig. 3
1
2
6
13
5 3
6
Fig. 4
4