Start-Up Sequence; When Not In Use - GE GUD37 Manuel Du Propriétaire

Masquer les pouces Voir aussi pour GUD37:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INFORMATION
READ ALL INSTRUCTIONS BEFORE USING THE APPLIANCE
ADDITIONAL WASHER SAFETY

START-UP SEQUENCE

■ Any time the washer is being started or restarts after the washer lid has been opened and closed, the washer
will turn on the cold water valve for two short periods followed by a 10 second pause before continuing. If the
lid is opened during this period, the washer will pause. You will have to push the Start button again to restart
the cycle.
AUTOMATIC DRAIN SEQUENCE
■ Machine will automatically drain any time the lid is left open for more than 15 minutes and water is present.
■ Machine will automatically drain if left in a paused state with the lid closed for more than 24 hours and water is
present.

WHEN NOT IN USE

■ Turn off water faucets to minimize leakage if a break or rupture should occur. Check the condition of the fill
hoses; GE Appliances recommends changing the hoses every 5 years.
READ AND SAVE THESE INSTRUCTIONS
4
49-90582-2

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Gud27Gud24

Table des Matières