LG LSEL6337 Serie Manuel D'utilisation page 29

element. Check for flatness by placing a ruler
across the bottom of the cookware. The ruler
should touch the cookware across the entire
bottom, with no gaps.
Cookware Recommendations
• Flat bottom and straight sides
• Heavy-gauge pans
• Pan sizes that match the amount of food to be
prepared and the size of the surface element
• Weight of handle does not tilt pan. Pan is well
balanced
• Tight-fitting lids
• Flat bottom woks
Cookware should not
• have a curved or warped
bottom.
• be smaller or larger than
the surface burner.
• have a heavy handle that
tilts the pan.
• be a wok with a ring
stand.
• have loose or broken handles.
• have loose-fitting lids.
NOTE
• Do not use pans less than 7 inches in diameter
on the front elements.
• Do not use foil or foil-type containers. Foil may
melt onto the glass. Do not use the cooktop if
metal has melted on it. Call an authorized LG
Service Center.
Choosing Cookware
The cookware material determines how evenly and
quickly heat is transferred from the surface
element to the pan bottom. The most popular
materials available are:
• Aluminum - Excellent heat conductor. Some
types of food will cause it to darken (anodized
aluminum cookware resists staining and pitting).
If aluminum pans slide across the ceramic
cooktop, they may leave metal marks which will
resemble scratches. Remove these marks
immediately.
• Copper - Excellent heat conductor but discolors
easily. May leave metal marks on glass-ceramic
(see Aluminum above).
• Stainless steel - Slow heat conductor with
uneven cooking results. Is durable, easy to clean
and resists staining.
• Cast iron - A poor heat conductor but retains
heat very well. Cooks evenly once cooking
temperature is reached. Not recommended for
use on ceramic cooktops.
• Porcelain-enamel on metal - Heating
characteristics will vary depending on base
material. Porcelain-enamel coating must be
smooth to avoid scratching ceramic cooktops.
• Glass - Slow heat conductor. Not recommended
for ceramic cooktop surfaces because it may
scratch the glass.
Home Canning Tips
Be sure that the canner is centered over the
surface element and is flat on the bottom.
• The base must not be more than 1 inch larger
than the element. Use of water bath canners
with rippled bottoms may extend the time
required to bring the water to a boil and may
damage the cooktop.
• Some canners are designed with smaller bases
for use on smooth surfaces.
• Use the high heat setting only until the water
comes to a boil or pressure is reached in the
canner.
• Reduce to the lowest heat setting that maintains
the boil, or pressure. If the heat is not turned
down, the cooktop may be damaged.
OPERATION 29