Product Description; Safety; General - henkelman DT 60 Mode D'emploi

Product description

The dip tank is applied in food packaging processes. Food products are usually packed in
shrink bags closed by a sealing process. The food packaging can also include a vacuum
process for food preservation. After the packaging process, food products are placed into
the dip tank with warm water in which the shrink bag will smoothly shrink around the food
product. The main objectives for the dip tank shrinking process is to shrink the plastic flaps
from the packaging material around the food product in order to enhance the product
packaging presentation and to make the product handling and distribution process easier.

Safety

General
















Henkelman-webshop.nl
8
All people responsible for control must at least fully read and
comprehend the chapters on control and safety of these operating
instructions.
All people responsible for the assembly, installation, maintenance
and/or repair must read and comprehend all these operating
instructions.
The user is responsible for the interpretation and use of this manual in
all circumstances. Please contact the supervisor in case of questions or
doubts about the correct interpretation.
This user manual must be kept in the proximity of the machine and must
be easily accessible to users.
All major services, adaptations to the line and any remarks must be kept
in a log.
No changes to the installation may be made without written permission
of the supplier.
Please contact the manufacturer for special maintenance adjustments
that are not included in this user manual.
Always meet the safety requirements as indicated in this chapter.
The correct functioning and safety of the system can only be
guaranteed if the recommended maintenance is carried out on time and
correctly.
The guarantee and / or liability expires if damage is caused by repairs
and/or changes not made by an authorized distributors.
In the case of malfunctions contact the supplier.
High pressure cleaning is not permitted. This can cause damage to
electronics and other parts.
The working space around the installation must be safe. The installation's
owner has to take the necessary safety precautions that are required to be
able to operate the installation safely.
It is prohibited to start the installation in an area with a danger of
explosion.
The installation was developed for safe production under normal