oneConcept 10029960 Mode D'emploi page 20

The base station has five keys for easy operation: SET, ALARM, MIN/MAX, + and SNOOZE/
LIGHT. And there are four program modes available: Quick Display Mode, Setting Mode,
Alarm Mode and Min/Max Mode.
The program mode can be exited at any time by either pressing the SNOOZE/LIGHT key, or
waiting for the 10-second time-out to take effect.
While in Normal Mode, press the SET key to enter the Quick Display Mode as follow:
• Outdoor Temperature / Dew point (press the MIN/MAX key or + key shifts the display bet-
ween outdoor temperature and dew point)
• Absolute pressure / Relative pressure (press the MIN/MAX key or + key shifts the display
between the absolute pressure and relative pressure)
Press the SET key to accept the change and advance to the next display mode. Continue to
press the SET key to toggle through the display mode until return to the normal Mode
Press SET for 3 seconds while in normal mode to enter the normal Setting mode. Then, press
SET repeatedly to scroll through and select the following setting options in sequence :
1 Time Zone Setting
2 12/24 hour format
3
Manual time setting (hours/minutes)
4 Calendar setting (year /month /date)
5 Temperature display unit degree Celsius or Fahrenheit
6
Indoor temperature calibration
7
Indoor humidity calibration
8 Outdoor temperature calibration
9
Outdoor humidity calibration
10
Air pressure display units in hPa or inHg
11 Relative pressure setting from 919.0hPa – 1080.0hPa (default 1013.5hPa)
12 Pressure threshold setting (default 2hPa)
13
Storm threshold setting (default 4hPa)
In the setting modes, press + or MIN/MAX to change or scroll the values. Hold the + key or
MIN/MAX for 3 seconds to increase/decrease digits in great steps. Press SNOOZE/LIGHT or
idle 10 seconds, so the setting mode will be quit and you return to Normal Mode
20
Program Mode
Quick Display Mode
Setting Modes