Control Reference Guide - Technics OTTAVA S SC-C50 Manuel D'utilisation

Masquer les pouces Voir aussi pour OTTAVA S SC-C50:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Control reference guide

This unit (front/top)
01 [
] Standby/on switch
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.
02 [
] [ ] Adjust volume
• 0 (min) to 100 (max)
03 Display
Input source, etc. are displayed.
04 [
] Favorite
You can register your favorite station or
playlist (USB, Podcasts, Spotify, etc.), and call
them.
• You can register up to 9 favorite stations or
playlists. To register, press and hold [
until "Memorised" is displayed while
a station tuned in or music is being
played back. Then, the station or music
is automatically registered to an unused
number from 1 to 9.
05 [
] Play/Pause
06 [
] Switch the input source
07 Built-in microphone
08 Product identification marking (Bottom
of this unit)
• The model number is indicated.
08
(08)
This unit (rear)
DIMMER
INFO
09 [•DIMMER/-INFO]
Adjust the brightness of illumination of the
display and bottom of the unit.
• When the display is turned off, it will
light up for a few seconds only when you
operate this unit. Before the display turns
off, "Display Off" will be displayed for a few
seconds.
• Press [•DIMMER/-INFO] repeatedly to
switch the brightness.
• Press and hold [•DIMMER/-INFO] to
display the network status or settings. The
displayed items are changed by pressing
[•DIMMER/-INFO] repeatedly. (The
brightness does not change during this
period.)
10 USB-A terminal (DC 5 V
You can play back music stored on the
connected USB device using the dedicated
app "Technics Audio Center" (free of charge)
on your tablet/smartphone ( 09). For
details, visit:
www.technics.com/support/
]
• If a USB device is connected, [•DIMMER/-
INFO] is difficult to press. Remove the USB
device as necessary.
11 LAN terminal ( 11)
12 Optical digital input terminal
You can connect a CD player, etc. with
optical digital audio cable (not supplied) and
play back music. ( 09)
13 AUX IN terminal
You can connect a portable audio player, etc.
with an analog audio cable (3.5 mm (
(not supplied) and play back music. ( 09)
14 AC IN terminal (
10BASE-T/
100BASE-TX
AC IN
DIMMER
INFO
5V
500mA
L AN
OPT IN
AUX IN
10BASE-T/
100BASE-TX
5V
500mA
L AN
OPT IN
AUX IN
500 mA)
) ( 09)
AC IN
/
"))
1
8

Publicité

Chapitres

Table des Matières
loading

Table des Matières