Using The Sleep Timer; Using The Alarm Function - Yamaha MCR-B020 Mode D'emploi

Using the sleep timer

When the specified time has elapsed, the unit will turn off automatically.

Using the alarm function

The internal sound (melody) and then the selected audio source are played at the time set for the alarm.
If the selected audio source cannot be played back at the time set for the alarm, the internal sound is played back.
Various audio sources
You can choose from audio CD, data CD, USB device, or FM/AM. The following playback methods can also be selected
depending on the audio source:
Source
Selected track
Audio CD
Resume
Folder
Data CD/USB device
Resume
Preset station
FM/AM*
Resume
* AM radio is available only for North America model.
You can not choose Bluetooth and AUX as the audio source.
Snooze
The snooze function can be enabled to replay the alarm after 5 minutes (☞ P. 17).
Playback
method
The selected track is played repeatedly.
The track you listened to last time is played back.
The selected folder is played repeatedly.
The track you listened to last time is played back.
The selected preset station is played.
The FM/AM* station you listened to last time is played back.
Press SNOOZE/SLEEP repeatedly to specify the
time after which the unit will turn off.
You can specify 30, 60, 90, 120 or OFF.
When you select a time, the sleep timer is turned on, and the
sleep indicator ( ) is shown in the front panel display.
If you press SNOOZE/SLEEP while the sleep timer is activated,
the sleep timer setting will be canceled.
Function
USEFUL FUNCTIONS
15
En