Publicité
Les langues disponibles
Les langues disponibles
REAR WHEEL ASSEMBLY
Remove the cardboard packaging of both
4.1
wheels.
Open the rear derailleur cage and activate the
Pull the spacer out of the rear brake caliper.
4.3
4.4
CAGE LOCK by pressing the small button with
Please keep it for future bike transports.
the lock symbol on it.
1 2 y t
P REPARI NG
Remove the frame cover from the main frame.
4.2
Unscrew the rear wheel axle from the frame
and remove the axle´s transport protection.
Unscrew the rear wheel axle from the frame and
4.5
remove the axle's transport protection.
REAR WHEEL ASSEMBLY
Place the rear wheel in the frame. Make sure
Insert the axle until it cannot go any further.
5.1
5.2
Then you can screw it in clockwise with the 6
to place the chain on the smallest cog of the
mm Allen key.
cassette. Carefully pull the shifter rearwards
to make the insertion easier.
Press the derailleur cage forwards to release
5.4
the CAGE LOCK. Once released, carefully
guide the cage rearwards until it puts tension
on the chain.
Tighten the rear wheel axle with a torque
5.3
from 10 - 15 Nm.
P l ea se f ol l ow t h e
t o rq u e sp e c i fi c at i on s of
t h e m a n u fac t u rer s:
Rear wheel axle //
10 – 15 Nm
y t 1 3
Publicité
