Getting To Know Your Rotating Waffle Maker; Before First Use; Operating Instructions - Bella 13991 Manuel D'instructions

Getting to Know Your Rotating Waffle Maker

Product may vary slightly from illustration
Top View
Bottom View

Before First Use

1. Carefully unpack the Rotating Waffle Maker and remove all packaging and materials.
2. Before using your Waffle Maker for the first time, wipe the cooking plates with a damp cloth to remove
all dust, and then dry. Wipe outer surfaces with a slightly damp, soft cloth or sponge.
CAUTION: Take care to prevent water from running into the appliance.
Never immerse ROTATING Waffle Maker BODY in water or any other liquids!
3. Set the appliance on a dry, clean and flat surface. Keep the handle folded until use.
SO-311073_13991_BELLA_Rotating Waffle Maker_Polished SS IM_145x210mm_R5.indd 4-5
Figure 1
Temperature Control
Dial (Top View)
Red POWER Light
Blue READY Light (Top)
Top Non-Stick
Cooking Plate
Bottom Non-Stick
Cooking Plate
Removable
Drip Tray
Folding handle
Blue READY Light
(Bottom)
Polarized Plug
4

Operating Instructions

1. Unfold handle and lift top cooking plate. Make sure the Rotating Waffle Maker's bottom cooking plate is
positioned flat and locked into a stable position. Before baking the first waffles of the day, use a pastry
brush to lightly coat the top and bottom waffle plates with vegetable oil. Do not use non-stick sprays as
they can cause build-up on the cooking plates.
2. Plug unit into a 120 V AC electrical outlet. The red POWER light will illuminate and remain lighted during
use.
NOTE: When your Rotating Waffle Maker is heated for the first time, it may emit slight smoke or odor.
This is normal and should disappear after one or two uses. This does not affect the safety of the
appliance. However, as it may affect the flavor of the first waffles prepared in the Waffle Maker, it is
recommended that these be discarded.
MIN
Keeps
waffles
warm
Red
POWER
Light
Top View
3. Turn the temperature control dial to the MAX setting to preheat.
4. While preheating, prepare waffle batter.
5. After approximately 5 minutes, the blue READY light will illuminate, indicating the unit is preheated and
is ready for use.
Blue
READY
Light
Bottom View
6. Set the waffle temperature control to the desired setting. A lower setting produces a lighter browned
waffle, while waffles made at a higher setting are darker and crispier. When preparing a recipe for the
first time, set the control to the middle; then adjust according to preference. Recipes will vary in cook
time and brownness; batters with more sugar will brown quicker. Note the perfect setting for each
batter recipe for future use.
7. Pour or ladle 3/4 to 1 cup batter onto the bottom cooking plate. Add just enough batter to fill lower grid
so that the peak area is covered. If necessary, use a spatula to spread the batter in to the corners of the
plate. Try not to overfill, batter will expand when cooked.
The drip tray will catch any spilled-over batter.
8. The blue READY light will turn off as the baking cycle begins.
MAX
Preheat
Waffle
Maker
Blue
READY
Light
5
2018-09-19 9:16 AM