Windows 98 Quick Installation - Linksys EtherFast Serie Installation Rapide

6. Windows will show that the files have been found. Verify that the Setup
Utility CD is in your CD-ROM drive and click Finish to continue.
7. The following screen will prompt you for the driver location. In the Copy
Files From: field, type D:\Drivers\WIN95. Then, click OK.
8. Windows 95 will begin copying files to your PC. When asked if you want
to restart your PC, remove the floppy disk and click Yes.
The Etherfast ® 10/100 LAN Card has been installed successfully.
6
Instant EtherFast ® Series 10/100 LAN Card

Windows 98 Quick Installation

1. Start up your PC in Windows 98.
2. Windows 98 will automatically detect the presence of the EtherFast
your PC.
3. Insert the "Linksys Setup Utility" CD into your CD-ROM drive while the
Add New Hardware Wizard (in English) window is visible. Click Next.
4. Select "Search for the best driver for your device (Recommended)" and click
Next.
Note: Do not click Cancel or Skip at
any time during the installation.
Doing so will prevent the driver
from being properly installed on
your PC.
® Card in
7