Overview; Windows 95 Quick Installation - Linksys EtherFast Serie Installation Rapide

Overview

After installing the EtherFast ® 10/100 LAN Card in your PC, follow these
instructions to install the card's driver. For troubleshooting tips during setup,
please contact Linksys technical support.

Windows 95 Quick Installation

1. Start up your PC in Windows 95.
2. Windows 95 will automatically detect the EtherFast
your PC. The Update Device Driver Wizard window (below) or a similar
window will appear.
3. Insert the "Linksys Setup Utility" CD into your CD-ROM drive. Click
Next.
4
Instant EtherFast ® Series
Note: Do not click Cancel or Skip at
any time during the installation.
Doing so will prevent the driver
from being properly installed on
your PC.
® 10/100 LAN Card in
10/100 LAN Card
4. A screen will appear stating that Windows 95 was unable to locate the driv-
er. Click Other Locations to enter the driver's location manually.
5. Type the driver location, D:\Drivers\WIN95, in the location field on the
Select Other Location Screen. Then, click OK.
5