Publicité
Les langues disponibles
Les langues disponibles
3 Moisten the brush head and your
face with water. Do not use the
Precision Brush with a dry brush
head, as this can irritate the skin.
If preferred, you can put a bit of
cleanser onto the brush head.
Gently rub the cleanser in-between
the bristles so it stays on the brush
head. Do not apply too much
cleanser onto the brush head to
prevent cleanser from splashing into
the eyes when the treatment starts.
4 Press the on/off button to switch
the appliance on and choose your
preferred setting.
Note: When you attach a different
brush head, the appliance
recognizes it. You will hear a beep
and the intensity setting indications
flash alternately (Fig. 3).
5 Place the Precision Brush on the
right side of your nose. Gently
move the brush head up and down
across the right side of your nose,
and if preferred, also in the mouth
area (Fig. 4).
Note: Do not push the brush head
too hard onto the skin, to make
sure that the treatment remains
comfortable.
Important: Make sure that you
avoid the delicate skin around the
eyes. Make sure you do not treat
your lips, the inside of the nose and
areas around your eyes with the
brush head.
6 After 15 seconds, the appliance
pauses briefly to let you know you
have to move it to the other side of
your nose (Fig. 5).
7 When the program is finished, turn
the appliance off.
8 After the treatment, rinse and dry
your face.
Cleaning and storage
Do not use scouring pads, abrasive
cleaning agents or aggressive liquids
such as alcohol or acetone to clean the
appliance or attachments.
1
Clean and store the appliance after
each use according to the VisaPure
Advanced user manual.
2 Thoroughly clean the Precision Brush
with warm water and mild soap after
each use. Shake off excess water.
3 Remove the Precision Brush from
the handle and clean the back of
head and the connection pin of the
appliance under the tap.
4 Dry the Precision Brush with a soft
towel or allow to air dry thoroughly.
Publicité
