Safety Instructions - Tetra WP 300 Mode D'emploi

SAFETY INSTRUCTIONS

Preventing hazardous situations
• Only connect the WP 300 / WP 600 / WP 1000 to
a professionally installed plug socket.
• Only connect the WP 300 / WP 600 / WP 1000 to
the mains if the local supply voltage corre-
sponds to the specifications in the technical
data.
• Protect the power plug from moisture.
• Always disconnect the water pump from the
mains before cleaning or carrying out any
maintenance tasks.
• Do not allow children to play with small parts as
there is a risk of choking.
• The power plug must be freely accessible so
that the water pump can be easily and quickly
disconnected from the mains in an emergency.
• Never make any technical changes to the
device.
• Damaged connection cables cannot be re-
placed. Dispose of the device.
Preventing material damage
• Do not bend or crush the mains connection
cable.
• Only use original spare parts and accessories.
Note the symbols on the device
ABOUT THIS MANUAL
The manual goes with the WP 300 / WP 600 /
WP 1000 and must be stored for future reference.
Do not dispose of the device with house-
hold waste; send for recycling.
Protection class II: Metal parts which can
lead to voltage failure are insulated.
Intended for indoor use only.
UK
5