Tectro TBH 460 Manuel D'utilisation page 101

man_TBH460 ('11).indd 101
2. V erify the possible cause for the "AlAr no rEtE" in chapter H "troubleshoot-
ing".
3. R ectify the cause of the error, if possible following the advices in chapter H
"troubleshooting", or alternatively call in a Tectro authorized engineer.
4. Clean the burning pot.
5. Press P4 for longer than 1 second to delete the alarm message from the dis-
play.
6. (Re-)start the stove.
F. Maintenance
The heat, ash and residue produced by the combustion of the fi re wood makes
regular cleaning and maintenance by both the end user as well as an authorized
technician necessary. Periodically carefully cleaning the stove is important for safe-
ty, effi cient operation and -in the same time- increasing the life time of the stove.
Do not use steel wool, hydrogen chloride or other corrosive, aggressive or scratch-
ing products to clean neither the internal nor the external surface of the stove.
Especially after a prolonged shutdown period the stove and the chimney system
must be checked for any blockages.
F.1 Maintenance tO be dOne by the (end-) user
Task
cleaning inner surface of stove
cleaning outer surface of stove
cleaning the window pane
cleaning fumes chamber
cleaning the fi re box
cleaning the burning pot
cleaning the ash draw
checking the fi re door seal
cleaning pellet hopper and auger
The exact cleaning frequency must be intensifi ed when using non optimal quality
pellets.
Frequency
Weekly (during season)
At your convenience, once per 2 months
When dirty
Every 2 weeks
Every 2 weeks
Before each start up and after every 2
days of burning.
When it is full and before each start
up.
Twice per year, fi rst time at beginning
of season
Once per month
4 1
101
07-10-11 09:06