Publicité
È
É
FRONT BRAKE AND REAR BRAKE
5 - 20
4. Install:
[Front]
• Master cylinder kit 1
• Plain washer 2
• Circlip 3
• Master cylinder boot 4
To master cylinder 5.
[Rear]
• Master cylinder kit 1
• Push rod 2
• Circlip 3
• Master cylinder boot 4
To master cylinder 5.
NOTE:
• Apply the brake fluid on the master cylinder
kit.
• Apply the lithium soap base grease on the tip
of the push rod.
• When installing the circlip, use a long nose
circlip pliers.
È Front
É Rear
EC5A5310
Front master cylinder
1. Install:
• Master cylinder 1
• Master cylinder bracket 2
• Bolt (master cylinder bracket) 3
9 Nm (0.9 m · kg, 6.5 ft · lb)
NOTE:
• Install the bracket so that the arrow mark a
face upward.
• First tighten the bolts on the upper side of the
master cylinder bracket, and then tighten the
bolts on the lower side.
CHAS
Publicité
Chapitres
