Publicité
2
4
1
3
2
1
KICK AXLE AND SHIFT SHAFT
EC4B5111
Stopper lever
1. Install:
NOTE:
Align the stopper lever roller with the slot on
segment.
Shift guide and shift lever assembly
1. Install:
NOTE:
Apply the engine oil on the springs, pawl pins
and pawls.
2. Install:
3. Install:
NOTE:
• The shift lever assembly is installed at the
same time as the shift guide.
• Apply the engine oil on the bolt (segment)
shaft.
4. Install:
4 - 76
• Torsion spring 1
• Plain washer 2
• Stopper lever 3
• Bolt (stopper lever) 4
10 Nm (1.0 m · kg, 7.2 ft · lb)
• Spring 1
• Pawl pin 2
• Pawl 3
To shift lever 4.
• Shift lever assembly 1
To shift guide 2.
• Shift lever assembly 1
• Shift guide 2
• Bolt (shift guide) 1
10 Nm (1.0 m · kg, 7.2 ft · lb)
ENG
Publicité
Chapitres
