Safety; Transport / Temporary Storage; Receiving Inspection And Stockage; Handling - SFA SANIGREASE T 40 Notice De Service / Montage

EN

1. SAFETY

These operating instructions contain basic instructions which have to be observed during set-up, operation
and maintenance. For this reason, these operating instructions must by all means be read before installation
and commissioning by the installation technician as well as by the competent specialist staff / user, and must
be permanently available at the location of the device.
Not only the general safety instructions mentioned in this main point on safety have to be observed, but also
the special safety instructions mentioned in the other main points, for example for private use.
If the instructions of the operation manual – especially the safety instructions - are not observed, or in case of
unauthorized modifications of the plant or the installation of non-original spare parts, the guarantee expires
automatically. The manufacturer assumes no liability for damages resulting from such behaviour !
IDENTIFYING THE WARNING SIGNS
WARNING

2. TRANSPORT / TEMPORARY STORAGE

IMPORTANT : PLEASE READ CAREFULLY WHEN YOU RECEIVE THE DEVICE !

2.1 RECEIVING INSPECTION AND STOCKAGE

• Check that the appliance casing has no visible damage. In case of any damage, provide details on the
carrier's delivery note.
• Store the appliance away from potential knocks. Do not allow rainwater to get inside.
• The temperature inside the appliance must never go above 30°C.

2.2 HANDLING

Before handling, pump out any residual water every time.

3. DESCRIPTION

3.1 OPERATING PRINCIPLE

SANIGREASE T is a grease separator that treats used water by separating fats and settled substances from
residual water from mobile washing appliances (SANIGREASE T 24) or from restaurants and collective
kitchens (SANIGREASE T 40/60/80/100).
9
Danger
This term defines a high risk of danger, which can lead to death or serious
injury, if not avoided.
Warning
This term defines a hazard which could cause a risk to the machine and its
operation, if it is not taken into account.
Dangerous area
This symbol, in combination with a keyword, characterises hazards that could
lead to death or injury.
Property damage
This symbol, in combination with the keyword WARNING, characterises
dangers to the machine and its proper operation.