Programming Instructions; Key Function - Fracarro KCPN Instructions D'emploi

The programming of the KCPN converter should be carried out using a TPE programmer by connecting it to the
converter's RJ45 outlet.
The menu item can be highlighted by scrolling with the
Press or to enter the required menu.
Press the keys to scroll through the values in the menu item.
Press the key to save the set configutation.
IMPORTANT: Press the TPE
the last modifications, the set data will be lost.
Press the key to leave the menu without saving modification.
In order to program and interpret the programming menu shown in the flow-charts, please refer to the following
tables:
TPE keys
4
8
......
0
S
Graphic indications of
the menu diagrams
Headend or device navigation
Emulation of the KTP
programmer

6. PROGRAMMING INSTRUCTIONS

key to save the settings. If this key is not pressed within 5 minutes from
Used to confirm an entered value or to select a menu
Used to cancel an entered value or exit a menu
9
Select the menu by the
Scroll the menu to the right
Scroll the menu upwards
Scroll the value to the right
6.1 TPE GENERAL MENU
TPE settings
TPE SETUP
HEADEND SETUP
KTP EMULATION
keys.

Key Function

Used to scroll the menu items
Used to enter values
Used to save the modifications
Meaning
or keys and exit with the
or to the left
or downwards
or to the left
TPE SETUP Menu
see page
HEADEND SETUP Menu
see page
KTP EMULATION Menu
see page
1
key
13
14
14