Fisher&Paykel DCS DishDrawer DD24 Serie Guide D'utilisation page 21

Important !
If a dishwasher cleaner/descaler is used, you must run a wash program with detergent
immediately afterward to prevent any damage to your dishwasher.
The dishwasher must be used with the filter plate, drain filter and spray arm correctly in place.
Cleaning the drain filter
Unplug the dishwasher or turn it off at the power supply.
1
To access the drain filter, lift up the plastic grid above it, as shown.
2
Lift and remove the drain filter. It is normal to find some water under it.
3
Empty, rinse clean under running water and replace back into the allocated space.
4
Ensure the drain filter is flush with the filter plate , then lower the plastic grid back into place.
5
Plug the dishwasher back in or turn it on at the power supply.
6
User maintenance instructions
17
US
CA