Reloop Spin!2+ Mode D'emploi page 78

35. Cue Button
By using this button you will change to Cue Mode. There are two possibilities in order to set a cue
point.
a) Cue Pause
In playback mode push the Play/Pause Button -34- in order to change to pause mode. Now push the
cue button in order to set a cue point.
b) Loop In
During playback or in pause mode you can push the Loop In button in order to set a cue point.
36.Forward and Reverse Button
Via this button you can determine the playback direction of the track (forward or reverse). In Time-
code Mode this button shows the direction the records moving in.
37. Skip Buttons
Push these buttons in order to load the previous or next track from your Spin! Library.
38. Fast Search Buttons
Via these buttons it is possible to fast search within a track. In Timecode Mode this function is deac-
tivated.
39. Pitch-Bend Buttons
Activate the pitch vernier adjustment via the Pitch Bend Button. By pushing and holding these
buttons you can temporarily increase or decrease the pitch. Release the button and the player will
return to the pitch that has previously been set via the pitch fader.
70