Publicité
Les langues disponibles
Les langues disponibles
The control unit model SC24 is suitable to control one actuator for single-leaf sliding gate with a maximum
motor power of 100W. The maximum absorption of the device is 150W at 230V 50Hz. The parameters must be
set after the complete system has been installed.
TR1 – TR3
DSW1
P1
P2
DL1 – DL9
DL10
DLR
F1
F2
M1
M2
M5
FST1-FST2
M4
CN1
CN3
K3
CN2
JF1
U2
RK1-RK2
LBT0499 – DS41627-001 – FW 1.01 2020
Description of the control unit
TORQ.
DELAY
Adjustment trimmer
Logic setting - configuration dip switch
Stroke saving button
Remote control saving button
Input status signalling LED
Red/green/orange two-tone Test and Programming LED
Blue voltage presence LED
Quick F2A fuse for protection of accessories and logic
Delayed T8A motor and transformer secondary protection fuse
Accessory input and output terminal board
Encoder input and motor output Terminal board/Connector
Limit switch terminal board
22Vac transformer secondary power supply terminal board
Antenna terminal board
Encoder connector, if present
Battery charger connector (optional code 41629/052 or 41629/051)
Receiver plug-in connector
Connector for optional remote control output card (optional code MCH2
41626/050)
Connector for update device
Microcontroller
Motor output relays
Publicité
