Publicité
WARNING
you conduct the calibration once a year.
WARNING
CLEANING AND THINGS TO REMEMBER
1. Use a soft, dry, clean-cloth clean the wrench and LCD panel.
2. Clean torque wrench by wiping. Do not immerse.
3. Store torque wrench in protective case at its lowest torque setting. Do not force
handle below lowest setting.
4. If the wrench gets wet, wipe it with a dry towel as soon as possible. The salt in
seawater can be especially damaging.
5. Do not use organic solvents, such as alcohol or point thinner when cleaning the
wrench.
6. Do not place the product nearby any magnetic products.
7. Do not exert heavy force or pressure on the LCD screen.
8. Do not use the products as striking tools.
9. Do not hit the products by using hammer or other tools.
10. Exceeding the largest standard torque value may result in the products' damage or
accuracy error(110%).
11. Do not use near or place in water.
12. Do not place the product in the high temperature and damp environment or do not
expose the product to sunlight.
13. Do not place the product in the full dust or sand environment.
14. Do not violently shake or drop the product.
15. Please take out the batteries if the product is not used a long period of time.
16. Do not throw the batteries into fire, and the batteries have to be recycled.
17. Please read carefully the operating manual, and then follow the guides of the
manual, before using the digital torque wrench.
18. Off state is prohibited to use.
19. Do not use the additional tools to extend the length of the handle, such as: iron or
plastic pipe.
20. Do not touch any button when torque is exerted.
21. The digital torque wrench cannot be applied to the conductive tools.
LUBRICATE
The wrench's internal mechanism is permanently lubricated during assembly. Do not
attempt to lubricate the internal mechanism.
1English1
MAINTENANCE
In order to maintain accuracy of the tools, we recommend that
Remove batteries before cleaning.
English
-15
Publicité
