Yamaha DVX-S120 Mode D'emploi page 63

Adjust speaker volume for 5ch Stereo DSP Program
DVR-S120 WB56650
POWER
AUDIO
SELECT MATRIX 6.1
/DTS
NIGHT
SW
TV INPUT
TV CH
A B C D E
PRESET
ON SCREEN
CH
ENTER
STATUS
TV VOL
MUTE
AMP
DVD/CD
VCR
TUNER
MOVIE MUSIC
MUSIC
CINEMA
Advice
• You can adjust the speaker volume level from 0 to 100%. The factory default setting is 100%, which is the maximum value.
Note
• The volume levels adjusted with the test tone or the CENTER or SURR buttons in 5ch Stereo mode are replaced with the
setting with "CT LEV", "RL LEV" or "RR LEV". The actual volume you hear is the volume shown in the CinemaStation
Display multiplied by the percentage you set for volume level.
• If "* CENTER" is set to "NON", you cannot adjust the Center Speaker. If "* SUR." is set to "NON", you cannot adjust the
Surround Speakers.
POWER
TV
SUBTITLE
ANGLE
STEREO
REPEAT A-B
CENTER SURR
SHIFT
SLEEP
PRESET
h
MENU
SET MENU
CH
RETURN
TEST
VOLUME
g
AMP
VIDEO
SPORTS GAME
You can adjust the speaker volume for 5ch Stereo DSP Program
Press AMP during playback.
Repeatedly press MUSIC and select "5ch
Stereo".
Repeatedly press g or h, and select the speaker
you want to adjust.
The switching order is CT LEV → RL LEV → RR LEV
→ CT LEV...
To adjust the Center Speaker volume level, select CT
LEV.
To adjust the Surround L Speaker volume level, select
RL LEV.
To adjust the Surround R Speaker volume level, select
RR LEV.
Press q or w and adjust the speaker volume
level.
When setting to 50%, the speaker volume becomes half,
and when setting to 0%, you hear no sound from the
Speaker.
Creating the Best Listening Space
61