Yamaha DM 1000 Mode D'emploi page 377

2.12.3.13 Parameter change (Function call: Scene/Library
Clear)
Reception
When this is received, the specified memory/library will be cleared. If this is re-
ceived from Studio Manager or Cascade Link, the operation will be executed,
and then the result of execution will be transmitted as the following parameter
response.
Transmission
When a memory or library is cleared on the DM1000, this message will be trans-
mitted with the device number set to [Tx CH].
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010000 10
clear function
0110ffff 6f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
function
SCENE LIB CLEAR 0x60
EQ LIB CLEAR 0x61
GATE LIB CLEAR 0x62
COMP LIB CLEAR 0x63
EFF LIB CLEAR 0x64
CHANNEL LIB CLEAR 0x66
INPATCH LIB CLEAR 0x67
OUTPATCH LIB CLEAR 0x68
Bus to Stereo LIB CLEAR 0x69
Surround Monitor LIB CLEAR 0x6A
AUTOMIX LIB CLEAR 0x6B
*1) aries with the firmware version.
2.12.3.14 Parameter change (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, the attribute of the specified memory/library will be
changed.
Transmission
In response to a request, a Parameter Change message will be transmitted on the
[Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted without
change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010100 14
attribute
0000ffff 0f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
attribute(protect:0x0001, normal:0x0000)
DATA 0ttttttt th
0ttttttt tl
End of exclusive
EOX 11110111 F7
function
SCENE LIB ATTRIBUTE 0x00
AUTOMIX LIB ATTRIBUTE 0x0B
number
1-99
41-200
5-128
37-128
41-200
1-128
1-32
1-32
1-32
1-32
1-16
number
0-99(0:response only)
1-16
Format des données MIDI
2.12.3.15 Parameter request (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the
[Rx CH].
Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010100 14
attribute
0000ffff 0f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
2.12.3.16 Parameter change
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, the patch link data of the specified scene will be modified.
Transmission
In response to a request, a Parameter Change message will be transmitted on the
[Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted without
change.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010100 14
link
0010ffff 2f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
inpatch
DATA 0iiiiiii ih
0iiiiiii il
outpatch
0ooooooo oh
0ooooooo ol
End of exclusive
EOX 11110111 F7
function
SCENE LIB LINK 0x20
2.12.3.17 Parameter request
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the
[Rx CH].
Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS 11110000 F0
Manufacture's ID number (YAMAHA)
ID No. 01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID 00111110 3E
Universal
MODEL ID 01111111 7F
Function call
ADDRESS 00010100 14
link
0010ffff 2f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX 11110111 F7
DM1000 Version 2—Mode d'emploi
377
(Function call: link)
number
0-99(0:response only)
(Function call: link)