Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

DECALS

Decal
C190-0142
Description
616
Warning.
Hot exhaust.
617
Warning.
High velocity discharge -
keep clear.
670
Personal Protective
Equipment required.
See Page 6.
1661
Read the instruction manual
for greasing and
maintenance information.
The instruction manual with
1662
this machine contains
important operating,
maintenance and health and
safety information. Failure
to follow the information
contained in the instruction
manual may lead to death or
serious injury.
1399
Push safety bar to stop.
P691
Do not pull here.
P1301
Push to stop,
Pull to reset.
(engine)
P3611
Danger
Rotating blades.
Keep hands and feet out.
25 / 65
Decal
C192-0112
C192-0102
01.03.2019
TW 280TDHB/(a)
Description
4099
Danger.
Rotating blades.
Keep hands and feet out.
2800
Reverse feed
2801
Forward feed
Warning
19517
Do not engage starter motor for
more than 20 seconds. Allow one
minute before attempting to
start. Investigate reasons for
failure to start. Excessive
cranking will result in starter
motor failure. This will not be
covered under warranty.
Lifting eye is designed to lift the
2949
machine's weight only. Do not
use hoist hook on lifting eye.
Use correctly rated safety
shackle only through lifting eye.
Lifting eye to be inspected every
6 months or before each use.
Always visually inspect lifting eye
prior to each use. Do not use
lifting eye if damaged.
3022
Clean under blades before
refitting or turning.
Failure to do so may result in
blade(s) coming loose and
damage being caused to the
rotor housing.
18393
New drive belts need
re-tensioning.
When new belts are fitted check
tension every 2-3 hours & adjust
until tension remains constant.
Fuel Here.
Risk of fire. Allow engine to cool
for 1 minute before refuelling.
Use diesel fuel only.
Danger
Do not climb into the feed funnel.
Rev: 2.0

Publicité

Chapitres

Table des Matières
loading

Table des Matières