Timberwolf TW 280TDHB Manuel Opérateur page 41

TW 280TDHB(a)
DIMENSIONS WITH ADJUSTABLE TOWHEAD
ADJUSTING THE TOWHEAD HEIGHT
The TW 280TDHB(a) chipper has the ability to adjust the towhead height to correspond with the vehicles towing point.
The preferred towing angle of any chipper is with the chassis level to the ground. The adjustable head has the ability to
move between 432mm from the ground to 1005mm giving an overall adjustment of 573mm.
C190-0142
4606mm (4076mm with tray closed)
The adjustable towhead fundamentally works the same as a fixed
standard towhead, however the front section of the head is retained in
position via 2 locking rings.
1
To adjust the height the locking handles located on the side of the head
(1) are turned in an anticlockwise direction to allow for the locking ring
to disengage from its apposing ring. Once the desired height has been
achieved the locking handles are turned clockwise until tight. The
latching of the hitch is as normal as is the fitting of the light plug and
breakaway cable as outlined in the 'Hitching onto the tow ball' section
on page 8.
3 / 65
Serial No. Location.
The serial number
can be found on
the identification
plate located on
the chassis beam.
01.03.2019
TW 280TDHB/(a)
TW 280TDHB(a)
SPECIFICATION
Engine type:
Kubota 4-cylinder turbo diesel
Maximum power:
33kW (45hp)
Cooling method:
Water cooled
Overall weight:
1240kg
Starting method:
Electric
Roller feed:
Twin series hydraulic motors
Maximum diameter material:
210mm (8 1 ⁄ ")
4
Fuel capacity:
36 litres
Hydraulic oil capacity:
15 litres
Material processing capacity:
Up to 6.5 tonnes/hr
Fuel type:
Diesel
Rev: 2.0