Safe Working; General Safety Matters; Noise Test - Timberwolf TW 280TDHB Manuel Opérateur

SAFE WORKING

GENERAL SAFETY MATTERS

• Do not operate chipper unless available light is sufficient
to see clearly.
• Do not use or attempt to start the chipper without the
feed funnel, guards and discharge unit securely in place.
• Do not stand directly in front of the feed funnel when
using the chipper. Stand to one side.
• Do not smoke when refuelling.
• Do not let anyone who has not received
instruction operate the machine.
• Do not climb on the machine at any time.
• Do not handle material that is partially
engaged in the machine.
• Do not touch any exposed wiring while the machine is
running.
• Do not use the chipper inside buildings.

NOISE TEST

Machine: TW 280TDHB
Notes: Tested chipping 200mm x 200mm corsican pine 1.5m in length
Noise levels above 80dB (A) will be
experienced at the working position.
Prolonged exposure to loud noise may cause
permanent hearing loss. All persons within a 4
metre radius must also wear good quality ear
protection (EN 352) at all times to prevent
possible damage to hearing.
Guaranteed Sound
Power: 118dB (A)
As required by Annex III of Directive
2000/14/EC "Noise Emission in the
environment by equipment for use outdoors".
Tested according to BS EN ISO 3744:2010.
C190-0142
7 / 65
DO NOT ALLOW
THE FOLLOWING
TO ENTER THE
MACHINE, AS
STONES
BRICKS
100.73 dB
91.07 dB
92.60 dB
R= 10 metres
01.03.2019
DAMAGE IS
LIKELY
CLOTH
METAL GLASS
STRING ROOTS
99.10 dB
95.23 dB
92.20 dB
93.33 dB
TW 280TDHB/(a)
PLASTIC
RUBBER
BEDDING
PLANTS
91.90 dB
R= 4 metres
Rev: 2.0