Manual Preset Tuning; Selecting Preset Stations - Yamaha PianoCraft MCR-840 Mode D'emploi

FM TUNING

Manual preset tuning

You can store up to 30 stations.
MEMORY
1
Tune into a radio station you want to preset.
See page 29 for tuning instructions.
2
Press MEMORY.
The PRESET indicator flashes on the front panel
display for about 5 seconds.
3
Press PRESET u / d repeatedly to select a
preset station number while the PRESET
indicator is flashing.
4
Press MEMORY to store while the PRESET
indicator is flashing.
The PRESET indicator lights up on the front panel
display.
5
Repeat steps 1 to 4 until all desired stations
are preset.
30
En
You can tune into any desired station simply by selecting
the preset station under which it was stored (☞p.29).
PRESET u / d
Press PRESET u / d repeatedly to select a
preset station.
y
• You can also use the front panel to select preset stations. Press
• When you press PRESET d / u on the front panel of the
■ To delete the preset station
1
2
3
To cancel deleting operation
Press OPTION.

Selecting preset stations

OPTION
PRESET d / u repeatedly to select a preset station.
receiver in standby mode, the receiver automatically activates
the tuner and tunes in to the preset station that you selected
previously.
Press TUNER to set the unit to FM mode.
Press OPTION to display the option menu.
Press / to select "PRESET DEL" and
press ENTER.
Press / to select the preset number you
want to delete and press ENTER.
The preset station is now deleted.
You can continue to delete preset stations on this
screen. Repeat steps 2 and 3 until all unnecessary
stations are deleted.
TUNER
PRESET u / d