Connecting Power Cables - Yamaha PianoCraft MCR-840 Mode D'emploi

Connecting a TV to the system
1 Connect the system and your TV via the HDMI jack, COMPONENT jacks or VIDEO jack of the DVD player and the
corresponding jack(s) of your TV.
2 Set "TV Screen" according to your TV (see "Setting the TV display" on page 14).
DVD player (DVD-840)
When connecting the system and your TV via the COMPONENT jacks, set the DVD player as described in "Selecting
the output type for COMPONENT jacks" (☞p.15).
When connecting the system and your TV via the HDMI jacks, set "HDMI Resolution" and "HDMI Color" of "Video
Output settings" in the Initial Settings menu (☞p.36).

Connecting power cables

After you made all connections, connect the power cables of this system and other components to AC wall outlets.
Receiver (R-840)
DVD player (DVD-840)
Composite video cable (supplied)
PREPARATIONS
To AC wall outlet
To AC wall outlet
9
En