Ferroli EGEA 200 HT Manuel D'utilisation, Installation Et Entretien page 90

Then press on the symbol
Set the operating mode desired during time band operation, the
equipment switch-on and switch-off time and press the confirm
button.
Now, press the back button at the top left.
When time band operation is activated, outside the time band the
90
EN
of the following image.
fig. 33
fig. 34
cod. 3541T590 - Rev. 04 - 05/2020
EGEA
equipment is in standby mode and this is the screen displayed.
Holiday mode can be activated in any operating mode by
pressing on the symbol
of the following image.
200 HT - 260 HT
fig. 35
. Then press on the symbol
fig. 36