Charging Cable Menu - Fronius Acctiva Professional Flash UCN US Instructions De Service

PRESET menu
(preferred set-
tings)
(continued)
3.
Important! Regardless of the „preferred setting" saved, another mode can be selected
at any time. After disconnecting the charging terminals or mains supply, the device
automatically reverts to the saved „preferred setting".
CHARGING
CABLE menu
1.
2.
3.
Preferred Setting: modes
Save charge acceptance test, standard charging, user charging, „flash operati-
on". After disconnecting the charging terminals or mains supply, the modes are
saved.
Charge acceptance test
User charging
Save the desired mode and exit the menu.
Open the CHARGING CABLE menu
If necessary, change measure (metric/imperial) by pressing the info button:
Set the length of the charger cable. Setting range: 1 to 25 m (3 ft. 3 in. to 82 ft.)
- Press Start/Stop button
- Display flashes. Set the length of the charger cable
- Press Start/Stop button to confirm setting
Standard charging
Flash operation
24