User U/I Menu, User Charging Settings - Fronius Acctiva Professional Flash UCN US Instructions De Service

USER U/I menu,
standard char-
ging settings
(continued)
IMPORTANT! the conservation charging voltage is only available in Charge mode.
Conservation charging does not take place if conservation charging is set to OFF.
However, if the battery voltage drops below 12 V, charging starts.
IMPORTANT! if charging does not end automatically after the set time has elapsed, the
charger will be switched off as a safety precaution.
USER U/I menu,
user charging
settings
Set conservation charging voltage (setting range: Off / 12.0 - 15.5 V)
- Press Start/Stop button
- Display flashes. Adjust conservation charging voltage in 0.1 V steps
- Press Start/Stop button to confirm setting
Set safety cut-out (setting range: 2 h - 30 h)
- Press Start/Stop button
- Display flashes. Adjust time in 10 min intervals
- Press Start/Stop button to confirm setting
Set maximum charging current (Setting range: see Technical Data)
- Press Start/Stop button
- Display flashes. Adjust max. charging current in 0.5 A steps
- Press Start/Stop button to confirm setting
Set main charging voltage (setting range: 12.0 - 15.5 V)
- Press Start/Stop button
- Display flashes. Adjust main charging voltage in 0.1 V steps
- Press Start/Stop button to confirm setting
21