Listening To Dab Digital Radio (European Models Only) - Onkyo TX-8270 Mode D'emploi

> Before Start > Part Names

Listening to DAB Digital Radio (European models only)

1
Basic operations
1. Repeatedly press TUNER (a) on the
remote controller and select "DAB".
0 The very first time you select DAB, the
Auto Tuning function automatically
scans the DAB Band 3 for the
multiplexes (i.e., stations) available in
your area. Once the scanning process
is complete, the first station that was
detected is selected.
2. Select the desired radio station with D/
C (b) on the remote controller.
0 If a new DAB station is introduced, or
you move to a new area, press SETUP
on the remote controller, then use the
cursors and ENTER button to run the
"DAB Auto Scan" in "7. Miscellaneous" -
"Tuner".
Changing the order stations are
> Install > Initial Setup
2
displayed:
You can sort the available stations
alphabetically or by multiplex.
1. Press TUNING MODE on the main unit
repeatedly to set the method for sorting
the display order from the following.
Alphabet (default setting): Sort
stations alphabetically.
Multiplex: Sort stations by multiplex.
Displaying DAB Radio Information:
1. Press the DISPLAY button (c) repeatedly
to display more information about the
selected DAB station.
DLS (Dynamic Label Segment): When
tuned to a station that's broadcasting
DLS text data, the text will scroll across
the display.
Program Type: Displays the type of
program.
Bit Rate and Audio Mode: Displays the
station's bit rate and audio mode
(Stereo, Mono).
Quality: Displays the signal quality.
> Playback
Advanced Setup | Supplementary Information | Others
0 - 59: Poor reception
60 - 79: Good reception
80 - 100: Excellent reception
Multiplex Name: Displays the name of
the current multiplex.
Multiplex Number and Frequency:
Displays the number and frequency of
the current multiplex.
a
b
c
En
29