Listening To Dab Digital Radio (European Models Only) - Onkyo TX-8220 Mode D'emploi

> Before Start > Part Names

Listening to DAB Digital Radio (European Models only)

1
Basic Operations
1. Repeatedly press TUNER (b) on the
remote controller and select "DAB".
0 The very first time you select DAB, the
Auto Tuning function automatically
scans the DAB Band 3 for the
multiplexes (i.e., stations) available in
your area. Once the scanning process
is complete, the first station that was
detected is selected.
2. Select the desired radio station with Up/
Down buttons (c) on the remote
controller.
0 If a new DAB station is introduced, or
you move to a new area, press SETUP
on the remote controller, then use the
cursors and ENTER to run the "DAB
Auto Scan" in "Tuner Setting".
Changing the order stations are
displayed:
You can sort the available stations
alphabetically or by multiplex.
1. Press SETUP on the remote controller,
> Install > Playback
select "Tuner Setting" - "Station Order",
and select the display order setting from
the following.
Alphabet (default setting): Sort
stations alphabetically.
Multiplex: Sort stations by multiplex.
Displaying DAB Radio Information:
1. Press DISPLAY (a) repeatedly to display
more information about the selected
DAB station.
DLS (Dynamic Label Segment): When
tuned to a station that's broadcasting
DLS text data, the text will scroll across
the display.
Program Type: Displays the type of
program.
Bit Rate and Audio Mode: Displays the
station's bit rate and audio mode
(Stereo, Mono).
Quality: Displays the signal quality.
0 - 59: Poor reception
60 - 79: Good reception
80 - 100: Excellent reception
2
Multiplex Name: Displays the name of
the current multiplex.
Multiplex Number and Frequency:
Displays the number and frequency of
the current multiplex.
Setup | Others
a
b
c
En 17