Securing To The Floor; Aeraulic Connections - Ferroli 200 LT-S Manuel D'utilisation, Installation Et Entretien

5.2 Securing to the floor

To secure the product to the floor, fasten the supplied brackets
as shown in fig. 10.
fig. 10- Fastening brackets
Then secure the unit to the floor with the aid of suitable plugs,
not supplied, as shown in fig. 11.
fig. 11- Securing to the floor

5.3 Aeraulic connections

In addition to the spaces indicated in 5.1, the heat pump.re-
quires adequate air ventilation.
Create a dedicated air channel as indicated in fig. 12.
80
EN
EGEA
200 LT-S - 260 LT-S - 200 LT - 260 LT
It is also important to ensure adequate ventilation of the room
containing the unit. An alternative solution is shown in the figure
below (fig. 13): it provides for a second ducting that takes air
from the outside instead of directly from the inside room.
cod. 3541T600 - Rev. 04 - 05/2020
Internal
compartment
fig. 12- Example of air outlet connection
Internal
compartment
fig. 13– Example of air outlet connection