Sony Handycam HDR-TD20 Mode D'emploi page 79

The amount of lights is not sufficient, so

camera-shake easily occurs. Use the flash.
The camcorder is unsteady, so camera-shake

easily occurs. Hold the camcorder steady with
both hands and record the image. However,
note that the camera-shake warning indicator
does not disappear.
The recording medium is full.

Photos cannot be recorded during processing.

Wait for a while, then record.
When [ REC Mode] is set to [Highest

Quality ] or [60p Quality
capture photos while recording movies.
Furthermore, if [ Frame Rate] is set to
[24p], you cannot record photos while the
camcorder is in movie recording standby
mode.
The distance between your camcorder and the

subject is too short. Widen the distance (p. 34)
or set the zoom to W. Or, select [Manual] in
[3D Depth Adjustment] and adjust the depth
(p. 72).
], you cannot
US