Self-Diagnosis Display/Warning Indicators - Sony Handycam HDR-TD20 Mode D'emploi

Self-diagnosis
display/Warning
indicators
If indicators appear on the LCD screen,
check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
You may hear a melody when some
warning indicators appear on the screen.
C:04:
The battery pack is not an "InfoLITHIUM"

battery pack (V series). Use an
"InfoLITHIUM" battery pack (V series)
(p. 19).
Connect the DC plug of the AC Adaptor to the

DC IN jack of your camcorder securely (p. 19).
C:06:
The battery pack temperature is high. Change

the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and

operate your camcorder again.
E::
Follow the steps from  on page 76.


The battery pack is nearly used up.

US

The battery pack temperature is high. Change

the battery pack or place it in a cool place.
Because the temperature of your camcorder

has reached a level where HDMI output
has stopped, no image is displayed on the
connected monitor, etc. Leave the camcorder
until the temperature decreases. However, you
can continue recording on the camcorder.
No memory card is inserted (p. 27).

When the indicator flashes, there are not

enough free spaces for recording images.
Delete unnecessary images (p. 57), or format
the memory card after storing the images on
other media (p. 74).
The image data base file may be damaged.

Check the data base file by selecting
[Setup]  [ Media Settings]  [Repair
Img. DB F.]  the recording medium.
The memory card is damaged.

Format the memory card with your camcorder

(p. 74).
Incompatible memory card is inserted (p. 28).


The memory card is write-protected.

Access to the memory card was restricted on

another device.
There is something wrong with the flash.

