Sony Handycam HDR-TD20 Mode D'emploi page 67

2
Connect your camcorder to the
recording device with the A/V
connecting cable.
Input
Red White
Signal flow
Connect your camcorder to the input jacks

of the recording device.
3
Start playback on your
camcorder, and record it on the
recording device.
4
When dubbing is finished, stop
the recording device, and then
your camcorder.
A/V
Remote
Connector
A/V
connecting
cable
Yellow
Notes
3D movies are converted to 2D with standard

definition image quality (STD).
You cannot copy images to recorders connected

with an HDMI cable.
Since copying is performed via analog data

transfer, the image quality may deteriorate.
High definition image quality (HD) movies

will be copied with standard definition image
quality (STD).
When you connect a monaural device, connect

the yellow plug of the A/V connecting cable
to the video input jack, and the white (left
channel) or the red (right channel) plug to the
audio input jack on the device.

Copying date and time information: [Data

Code] (p. 74)
Using 4:3 screen size display device: [TV Type]

(p. 74)
US