Operation With A Wall Thermostat; Setting The Holiday Function - eQ-3 Premium Mode D'emploi

16. Operation with a wall thermostat

If the actuator is going to be operated in conjunction with
a wall thermostat, this thermostat will need to be taught in
(see section 14). Once it has been taught in, "ECF" will ap-
pear on the display. No further settings can then be made
on the actuator and it will no longer respond to taught-in
remote controls or window contacts. If no wireless sig-
nal is received from the wall thermostat for a period of
60 minutes, the actuator will exit ECF mode. It will then
assume control of the temperature, which it will continue
to regulate in accordance with the weekly program until
the next wireless signal is received. To "teach out" a wall
thermostat, you must reinsert the batteries in the actuator
(and wait for approx. 1 minute). Once you have entered the
date and time of day, you can use the menu button (before
the adjustment run is initiated) to perform the "teach-out"
process as described in section 15.

17. Setting the holiday function

If you want a fixed temperature to be maintained for a set
period of time while you are on holiday or during a party,
you can make use of the Holiday function.
• Press and release the menu button repeatedly until the
suitcase symbol (
• Use the setting wheel to set the end of the time period
during which the temperature is to be maintained.
Press the OK button to confirm.
•
• Then use the setting wheel to set the date.
Press the OK button to confirm.
•
• Use the setting wheel to set the temperature; press OK to
confirm. The display will flash to confirm your settings.
The set temperature will remain in force until the speci-
fied time. After that, the actuator will adopt Auto mode.
Wireless commands from the window contact and remote
control will continue to be executed.
30
) appears on the display.