Step 2) Setting The Date And Time Of Day - eQ-3 Premium Mode D'emploi

7. (Step 2) Setting the date and time of day

The firmware version number will be displayed briefly once
you have inserted/replaced the batteries and then you will be
automatically prompted to set the date and time of day.
• Use the setting wheel (C) to set the year (B).
Confirm with OK (D).
•
Use the setting wheel (C) to set the month (B).
•
Confirm with OK (D).
•
• Use the setting wheel (C) to set the day (B).
• Confirm with OK (D).
Use the setting wheel (C) to set the hour (A).
•
Confirm with OK (D).
•
Use the setting wheel (C) to set the minute (A).
•
• Confirm with OK (D).
The motor will start moving back the control pin while the
entries are still being made.
If "InS" is displayed with a rotating "
•
indicates that the motor is still moving back. Once the
device is ready for the actuator to be installed on the
valve, just "InS" will appear on the display.
The weekly program and other settings can be cus-
•
tomised prior to installation. To do this, press the menu
button when "InS" is shown on the display. For further
details, please see "12. Configuration menu".
• Once programming is complete, "InS" will reappear on
the display and installation (Step 3) can commence.
When "InS" is visible on the display, you can activate
the teach-in function prior to installation by pressing
the
24
button briefly.
A B
C D
∏" symbol, this