Operating Modes; Configuration Menu - eQ-3 Premium Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Monday to Friday
From 00:00 to 08:30 17.0°C
From 08:30 to 17:00 21.0°C
From 17:00 to 23:59 17.0°C
Saturday and Sunday
From 00:00 to 23:59 15.0°C
To switch between the 3 operating modes described below,
press the menu button briefly (these operating modes can
only be selected following installation/Step 3):
Holiday function
maintained until a fixed point in time.
Manu:
Manual operation – The temperature is set manu-
ally using the setting wheel.
Auto:
Weekly program – The temperature is controlled auto-
matically in accordance with the stored weekly program.
The configuration menu can be used to modify settings.
To access this menu, press and hold down the menu
button (for more than 3 seconds).
Pro: For setting the weekly program (see Section "9 Set-
ting the weekly program")
dAt: For modifying the time of day and date
POS: For querying the actuator's current position
dSt: Automatic switchover at the start or end of daylight
saving time can be deactivated.
AEr: For setting the "window open" temperature and time
so that the temperature is automatically reduced in the
event of ventilation
tOF: For setting the offset temperature
rES: For restoring the factory settings
UnL: For teaching out all taught-in wireless components
28

11. Operating modes

(
): Set a temperature that is to be

12. Configuration menu

Publicité

Table des Matières
loading

Table des Matières